JW Designs LLC
EncloSure™ Replacement Lid for Zoo Med Creatures® 8″ × 8″
EncloSure™ Replacement Lid for Zoo Med Creatures® 8″ × 8″
Couldn't load pickup availability
The EncloSure™ replacement lid is independently designed by JW Designs LLC for the Zoo Med Creatures® Habitat Kit CT-3, commonly described as the Zoo Med Creatures 8″ × 8″ enclosure.
This product is a replacement lid only. The Zoo Med enclosure is not included.
It replaces the factory mesh screen top with a fitted frame and clear cast acrylic insert designed specifically for the Zoo Med Creatures Habitat Kit lid footprint.
Zoo Med lists the CT-3 enclosure at approximately 8.75″ × 8.5″ × 11.75″. The 8″ × 8″ designation used here is the common nominal size for identifying the enclosure and compatible replacement lid.
For tarantulas and other compact invertebrate setups, replacing the factory screen provides clear top-down viewing while letting the keeper choose the ventilation level appropriate for the animal and enclosure conditions.
Why Replace the Factory Screen?
Keep the terrarium you already have and replace the part that doesn’t work for your setup.
EncloSure™ replaces the factory mesh screen with a fitted replacement lid designed around the original Zoo Med enclosure. The frame and clear cast acrylic insert create a clean, integrated appearance rather than looking like an add-on sitting on top.
This Zoo Med version also uses the EncloSure™ Positive Lock System, a spring-loaded locking engagement designed to provide a more positive and consistent fit without relying on flexible locking tabs.
Clean fit. Clear view. Selectable ventilation. Designed to look like it belongs there.
Venting Options
No Vent
Solid cast acrylic for maximum humidity retention and minimal airflow.
Low Vent
Reduced airflow for setups where greater humidity retention is desired.
Medium Vent
Balanced airflow for general enclosure applications.
High Vent
Increased airflow for setups requiring greater air exchange.
MAX Vent
Maximum ventilation for airflow-dependent or drier setups.
Vent hole note: Vented configurations use approximately 3 mm openings. Very small animals or juveniles may be able to pass through the ventilation holes.
Ventilation requirements vary by species and enclosure setup. Select the configuration appropriate for the animal being housed.
Clarity & Viewing Experience
Clear cast acrylic provides an unobstructed top-down view without the screen pattern of the original mesh lid. Animals, plants, and enclosure details remain easier to see while the replacement lid maintains a clean, integrated appearance.
Compatibility
Compatible enclosure
Zoo Med Creatures® Habitat Kit CT-3
Zoo Med listed dimensions: approximately 8.75″ × 8.5″ × 11.75″
Common nominal size: 8″ × 8″
Designed to replace the factory mesh screen lid while retaining the original enclosure frame.
Not compatible with the Zoo Med Creatures® Creature Den Low Profile CT-6, Zoo Med Naturalistic Terrariums, or other enclosure families.
EncloSure™ is an independently designed product by JW Designs LLC for use with compatible Zoo Med enclosures. JW Designs LLC is not affiliated with or endorsed by Zoo Med.
Terrarium not included. Replacement lid only.
Common Questions
What replacement lid fits the Zoo Med Creatures Habitat Kit CT-3?
The EncloSure™ ZMC-0808 replacement lid is designed specifically for the Zoo Med Creatures Habitat Kit CT-3, commonly referred to as the Zoo Med Creatures 8x8 enclosure.
Is the Zoo Med Creatures 8x8 enclosure the same as the CT-3 Habitat Kit?
Yes. The Zoo Med Creatures Habitat Kit CT-3 is the enclosure commonly described as the Zoo Med Creatures 8x8. Zoo Med lists its full dimensions at approximately 8.75 x 8.5 x 11.75 inches.
Does this replace the original Zoo Med screen lid?
Yes. The EncloSure™ replacement lid replaces the factory mesh screen with a fitted frame and clear cast acrylic insert.
What is the EncloSure Positive Lock System?
The Positive Lock System uses a spring-loaded locking engagement designed to provide a positive, repeatable fit with the Zoo Med enclosure frame.
Does this lid fit the Zoo Med Creature Den Low Profile?
No. The Creature Den Low Profile CT-6 uses a different lid size and has its own EncloSure™ replacement lid.
What ventilation options are available?
No Vent, Low Vent, Medium Vent, High Vent, and MAX Vent are available. Ventilation should be selected based on the species, animal size, and enclosure conditions.
Are the ventilation holes escape-proof for very small animals?
No. Vented configurations use approximately 3 mm openings, and very small animals or juveniles may be able to pass through them.
Can this replacement lid be used for a tarantula enclosure?
Yes, when the Zoo Med CT-3 enclosure and selected ventilation configuration are appropriate for the tarantula being housed.
Can a heat lamp, ceramic heat emitter, or UV/UVB fixture sit on this lid?
No. This replacement lid is designed for ambient-temperature use only and is not intended to support heat lamps, ceramic heat emitters, or UV/UVB lighting.
Does the Zoo Med enclosure come with the lid?
No. This listing is for the EncloSure™ replacement lid only. The enclosure is not included.
Safety, Care & Warranty
This replacement lid is designed for ambient-temperature use only and is not intended to support heat lamps, ceramic heat emitters, or UV/UVB lighting.
Minor movement or flex of the acrylic panel is normal and does not affect performance or fit.
Share
