{"product_id":"zoo-med-creatures-8x8-replacement-lid","title":"EncloSure™ Replacement Lid for Zoo Med Creatures® 8″ × 8″","description":"\u003cp\u003eThe EncloSure™ replacement lid is independently designed by JW Designs LLC for the Zoo Med Creatures® Habitat Kit CT-3, commonly described as the Zoo Med Creatures 8″ × 8″ enclosure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis product is a replacement lid only. The Zoo Med enclosure is not included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt replaces the factory mesh screen top with a fitted frame and clear cast acrylic insert designed specifically for the Zoo Med Creatures Habitat Kit lid footprint.\u003c\/p\u003e\n\u003cp\u003eZoo Med lists the CT-3 enclosure at approximately 8.75″ × 8.5″ × 11.75″. The 8″ × 8″ designation used here is the common nominal size for identifying the enclosure and compatible replacement lid.\u003c\/p\u003e\n\u003cp\u003eFor tarantulas and other compact invertebrate setups, replacing the factory screen provides clear top-down viewing while letting the keeper choose the ventilation level appropriate for the animal and enclosure conditions.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy Replace the Factory Screen?\u003c\/h2\u003e\n\u003cp\u003eKeep the terrarium you already have and replace the part that doesn’t work for your setup.\u003c\/p\u003e\n\u003cp\u003eEncloSure™ replaces the factory mesh screen with a fitted replacement lid designed around the original Zoo Med enclosure. The frame and clear cast acrylic insert create a clean, integrated appearance rather than looking like an add-on sitting on top.\u003c\/p\u003e\n\u003cp\u003eThis Zoo Med version also uses the EncloSure™ Positive Lock System, a spring-loaded locking engagement designed to provide a more positive and consistent fit without relying on flexible locking tabs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClean fit. Clear view. Selectable ventilation. Designed to look like it belongs there.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eVenting Options\u003c\/h2\u003e\n\u003ch3\u003eNo Vent\u003c\/h3\u003e\n\u003cp\u003eSolid cast acrylic for maximum humidity retention and minimal airflow.\u003c\/p\u003e\n\u003ch3\u003eLow Vent\u003c\/h3\u003e\n\u003cp\u003eReduced airflow for setups where greater humidity retention is desired.\u003c\/p\u003e\n\u003ch3\u003eMedium Vent\u003c\/h3\u003e\n\u003cp\u003eBalanced airflow for general enclosure applications.\u003c\/p\u003e\n\u003ch3\u003eHigh Vent\u003c\/h3\u003e\n\u003cp\u003eIncreased airflow for setups requiring greater air exchange.\u003c\/p\u003e\n\u003ch3\u003eMAX Vent\u003c\/h3\u003e\n\u003cp\u003eMaximum ventilation for airflow-dependent or drier setups.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVent hole note:\u003c\/strong\u003e Vented configurations use approximately 3 mm openings. Very small animals or juveniles may be able to pass through the ventilation holes.\u003c\/p\u003e\n\u003cp\u003eVentilation requirements vary by species and enclosure setup. Select the configuration appropriate for the animal being housed.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eClarity \u0026amp; Viewing Experience\u003c\/h2\u003e\n\u003cp\u003eClear cast acrylic provides an unobstructed top-down view without the screen pattern of the original mesh lid. Animals, plants, and enclosure details remain easier to see while the replacement lid maintains a clean, integrated appearance.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible enclosure\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eZoo Med Creatures® Habitat Kit CT-3\u003cbr\u003eZoo Med listed dimensions: approximately 8.75″ × 8.5″ × 11.75″\u003cbr\u003eCommon nominal size: 8″ × 8″\u003c\/p\u003e\n\u003cp\u003eDesigned to replace the factory mesh screen lid while retaining the original enclosure frame.\u003c\/p\u003e\n\u003cp\u003eNot compatible with the Zoo Med Creatures® Creature Den Low Profile CT-6, Zoo Med Naturalistic Terrariums, or other enclosure families.\u003c\/p\u003e\n\u003cp\u003eEncloSure™ is an independently designed product by JW Designs LLC for use with compatible Zoo Med enclosures. JW Designs LLC is not affiliated with or endorsed by Zoo Med.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTerrarium not included. Replacement lid only.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat replacement lid fits the Zoo Med Creatures Habitat Kit CT-3?\u003c\/h3\u003e\n\u003cp\u003eThe EncloSure™ ZMC-0808 replacement lid is designed specifically for the Zoo Med Creatures Habitat Kit CT-3, commonly referred to as the Zoo Med Creatures 8x8 enclosure.\u003c\/p\u003e\n\u003ch3\u003eIs the Zoo Med Creatures 8x8 enclosure the same as the CT-3 Habitat Kit?\u003c\/h3\u003e\n\u003cp\u003eYes. The Zoo Med Creatures Habitat Kit CT-3 is the enclosure commonly described as the Zoo Med Creatures 8x8. Zoo Med lists its full dimensions at approximately 8.75 x 8.5 x 11.75 inches.\u003c\/p\u003e\n\u003ch3\u003eDoes this replace the original Zoo Med screen lid?\u003c\/h3\u003e\n\u003cp\u003eYes. The EncloSure™ replacement lid replaces the factory mesh screen with a fitted frame and clear cast acrylic insert.\u003c\/p\u003e\n\u003ch3\u003eWhat is the EncloSure Positive Lock System?\u003c\/h3\u003e\n\u003cp\u003eThe Positive Lock System uses a spring-loaded locking engagement designed to provide a positive, repeatable fit with the Zoo Med enclosure frame.\u003c\/p\u003e\n\u003ch3\u003eDoes this lid fit the Zoo Med Creature Den Low Profile?\u003c\/h3\u003e\n\u003cp\u003eNo. The Creature Den Low Profile CT-6 uses a different lid size and has its own EncloSure™ replacement lid.\u003c\/p\u003e\n\u003ch3\u003eWhat ventilation options are available?\u003c\/h3\u003e\n\u003cp\u003eNo Vent, Low Vent, Medium Vent, High Vent, and MAX Vent are available. Ventilation should be selected based on the species, animal size, and enclosure conditions.\u003c\/p\u003e\n\u003ch3\u003eAre the ventilation holes escape-proof for very small animals?\u003c\/h3\u003e\n\u003cp\u003eNo. Vented configurations use approximately 3 mm openings, and very small animals or juveniles may be able to pass through them.\u003c\/p\u003e\n\u003ch3\u003eCan this replacement lid be used for a tarantula enclosure?\u003c\/h3\u003e\n\u003cp\u003eYes, when the Zoo Med CT-3 enclosure and selected ventilation configuration are appropriate for the tarantula being housed.\u003c\/p\u003e\n\u003ch3\u003eCan a heat lamp, ceramic heat emitter, or UV\/UVB fixture sit on this lid?\u003c\/h3\u003e\n\u003cp\u003eNo. This replacement lid is designed for ambient-temperature use only and is not intended to support heat lamps, ceramic heat emitters, or UV\/UVB lighting.\u003c\/p\u003e\n\u003ch3\u003eDoes the Zoo Med enclosure come with the lid?\u003c\/h3\u003e\n\u003cp\u003eNo. This listing is for the EncloSure™ replacement lid only. The enclosure is not included.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eSafety, Care \u0026amp; Warranty\u003c\/h2\u003e\n\u003cp\u003eThis replacement lid is designed for ambient-temperature use only and is not intended to support heat lamps, ceramic heat emitters, or UV\/UVB lighting.\u003c\/p\u003e\n\u003cp\u003eMinor movement or flex of the acrylic panel is normal and does not affect performance or fit.\u003c\/p\u003e\n\u003cp\u003e📄 \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0918\/4778\/6868\/files\/EncloSure_Lid_System_Warranty_Care.pdf?v=1768339158\" title=\"Enclosure Lid System Warranty and Care\"\u003eEncloSure Lid System Warranty and Care\u003c\/a\u003e\u003c\/p\u003e","brand":"JW Designs LLC","offers":[{"title":"No Vent","offer_id":54566897222004,"sku":"EN-ZMC-0808","price":29.99,"currency_code":"USD","in_stock":true},{"title":"Low Vent","offer_id":54566897254772,"sku":"EN-ZMC-0808","price":29.99,"currency_code":"USD","in_stock":true},{"title":"Medium Vent","offer_id":54566897287540,"sku":"EN-ZMC-0808","price":29.99,"currency_code":"USD","in_stock":true},{"title":"High Vent","offer_id":54566897189236,"sku":"EN-ZMC-0808","price":29.99,"currency_code":"USD","in_stock":true},{"title":"MAX Vent","offer_id":54566897320308,"sku":"EN-ZMC-0808","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/4778\/6868\/files\/en-zmc-0808-hero.png?v=1778428246","url":"https:\/\/www.jwdesignsmfg.com\/products\/zoo-med-creatures-8x8-replacement-lid","provider":"JW Designs LLC","version":"1.0","type":"link"}